FOR JOHN DEERE

Showing 1 - 24 of 58 products

6-BOLT HUB FOR JOHN DEERE SKU: 982-27616
Transport Wheel Hub, fits John Deere Models 115, 200, 210, 220, 230, 235, 310, 330, 335, 360, 370, 440, 455, 1630 and 1640. Requires 6 9/16"-18 Wheel Bolts. Uses Bearing Kit 864-SMA235BK and Dust Cap 982-27618. Replaces A27616.

$85.48

In stock, 205 units

WHEEL BEARING KIT FOR JOHN DEERE SKU: 864-SMA235BK
Bearing kit for John Deere transport wheel hub 982-27616.Fits 230-235 and 1630-1640 with serial number 017301 and later.

$91.56

In stock, 9 units

BEARING KIT FOR TRANSPORT WHEEL HUB SKU: 864-SMA630BK
Fits John Deere Field Cultivators Models 960, 1000, 1010 and 1050.

$37.23

Only 4 units left

1-1/8 INCH SQUARE AXLE SLACK WASHER FOR CASE IH SKU: 864-SMAP34103
1/4" thick fits 1-1/8'' square axle.

$5.98

Only 5 units left

AGSMART 1-1/8 INCH SQUARE DISC BEARING FOR DISC BEDDER / HIPPER SKU: 851-SMAW208PP5
DC208TT5, 963889R91, W & A, Forrest City, I.H., Burch Hipper. Replaces JD9350.

$22.66

Sold out

1-1/8 INCH X 50-11/16 INCH SQUARE AXLE SKU: 868-SMA20133
Fits Models 210, 215, 220, 230, 235 & 630. Replaces A20133.

$82

In stock, 22 units

DISC BEARING WEAR GUARD FR JOHN DEERE SKU: 864-SMA28474
Wear Guard for Disc Bearing - Replaces AA28474 & A28438 / Used on 210 / 215 / 220 / 225 / 230 / 330 / 235 / 621 / 630 / 637 / 650

$11.86

In stock, 287 units

LEFT HAND DISC SCRAPER ARM FOR JOHN DEERE SKU: 864-SMA240887
JD Scraper ArmRH Rear, LH FrontRepl AN240887Qty: (1pc)Scraper Arm with 5/8 inch std. width slot. RH REAR, LH FRONT. Fits 215, 235, 627, 630, 635, 637 disc and 726 Finisher. Uses spiral pin SPC3121250 (5/16 inch X 1-1/4 inch ). Will replace AN240887.

$40.65

In stock, 55 units

RIGHT HAND DISC SCRAPER ARM FOR JOHN DEERE SKU: 864-SMA240886
JD Scraper ArmLH Rear, RH FrontRepl AN240886Qty: (1pc)Scraper Arm with 5/8 inch std. width slot. LH REAR, RH FRONT. Fits 215, 235, 627, 630, 635, 637 disc: 726 Finisher. Uses spiral pin SPC3121250 (5/16 inch X 1-1/4 inch . Will replace AN240886.

$40.64

In stock, 89 units

SCRAPER BLADE FOR JOHN DEERE DISC HARROW SKU: 864-SMA38364
Scraper blade for Model 235, 512, 630, 635, 637, 722, 2310, 2620, 2623, 2623VT, 2625, 2720. Uses spiral pin SPC3121250 (5/16 inch X 1-1/4 inch ). Will replace JD A38364, N242551.

$10.48

In stock, 808 units

DISC SCRAPER BLADE FOR JOHN DEERE SKU: 864-SMA20006
Models 110, 111, 115, 210, 220 & 230 JD disc. Will replace JD A20006.

$9.87

In stock, 285 units

31 INCH SPINDLE FOR JOHN DEERE SKU: 982-630S
Transport wheel spindle for AN183318 hub (Weld in required). Fits John Deere Field Cultivators Models 960, 1000, 1010 and 1050. Double ended. 1- 7/8" OD.

$95.21

Sold out

14-5/8 INCH SPINDLE FOR JOHN DEERE SKU: 982-24325
Transport wheel spindle for John Deere A27616 hub. OAL 14.63", 1.875" material diameter, 1-1/4" thread. Will replace JD AA24325.

$52.36

Sold out

BEARING SLEEVE 6-11/16 INCH OD X 7-1/4 INCH SKU: 864-SMA16
JD Bearing Sleeve1.75 inch OD x 6.69 inch L Repl A20647Qty (1 pc)1.75 inch OD x 1-1/26 inch ID x 6.69 inch bearing sleeve for disc models with 7 1/4 inch spacing. Used with SMA20621 and SMA20622 spools. Replaces JD A20647

$5.38

Only 4 units left

BEARING SLEEVE 8-1/2 INCH FOR 9 INCH SPACING SKU: 864-SMA17
1.75 inch OD x 1-1/26 inch ID x 8-1/2 inch bearing sleeve for disc models with 9 inch spacing. Used with A20621 and A37023 spools. Replaces JD A20648

$5.62

In stock, 688 units

8-3/4 INCH SPOOL FOR JOHN DEERE SKU: 864-SMA28448
8-3/4 inch x 5 inch Fabricated Steel Spool for 9 inch Spacing. Will replace JD A22848, AN183629 and AN240518. Has 1-1/2 inch round hole.

$32.50

In stock, 451 units

5-1/2 INCH SPOOL FOR JOHN DEERE SKU: 864-SMA37023
Spool, 5 1/2 inch for models with 9 inch spacing. Will replace JD A37023 and N241314. Used on 220, 225, MX225, 621, 627, 630, 637, 655, 660 disc harrows and 714 mulch-tiller.

$29.54

In stock, 685 units

3-7/8 INCH SPOOL FOR JOHN DEERE SKU: 864-SMA20622
3.8 inch Spool, Has 1.798 inch I.D Fits Models with 7-1/4 inch Spacing. Replaces N241318.

$24.04

In stock, 439 units

1-7/8 INCH SPOOL FOR JOHN DEERE SKU: 864-SMA20621
1-7/8 inch Spool, Fits Models with 7-1/4 inch and 9 inch Spacing.For models with 7 1/4 inch and 9 inch spacing. Replaces A20621 and N241315.

$15.46

In stock, 399 units

BUMPER WASHER FOR JOHN DEERE SKU: 864-SMA25694
Bumper Washer, Fits models 100, 105, 110, 111, 115, 210, 215, 220, 230, 235, 620, 630, 635, 637, 640, 650 series discs. Fits 700 series mulch finisher and 955 ripper.

$11.67

In stock, 149 units

5 INCH SPOOL FOR JOHN DEERE SKU: 864-SMA34211
Fits 300 Series Discs and 635, 640 Tandem Discs. Replaces B34211.

$73.23

In stock, 91 units

BEARING SLEEVE 2-3/16 INCH OD X 8-5/8 INCH SKU: 864-SMA34203
2.188 inch OD x 1.75 inch ID x 8.63 inch JD Bearing Sleeve for 9 inch Spacing. Fits JD 310, 315, 330, 331, 335, 340, 350, 355, 360, 370, 375, 635, 640, 650, 670 Discs, 1710, 1710A Mulch Tiller. Replaces B34203

$19.75

In stock, 52 units

7 INCH SPOOL FOR JOHN DEERE SKU: 864-SMA260397
Fabricated Disc Spool for 11 inch Spacing Units. Fits 637, 640, 650 Discs and 510, 512 Disc Rippers. Replaces AN260397 and AA29482.

$82.76

In stock, 33 units