LIFT ARM AND STABILIZER
LIFT ARM AND STABILIZER
94 products
Showing 25 - 48 of 94 products
Display
View
STABILIZER ARM - LEFT HAND FOR FORD
SKU: SKA6251
Stabilizer Arm Left hand arm only for SK23-6X. Fits Fod 2000, 3000. 7/8" hole diameter. Made of 3/8" x 2" heat treated high carbon steel; 31-5/8" centers.
Only 4 units left
Stabilizer Arm Left hand arm only for SK23-6X. Fits Fod 2000, 3000. 7/8" hole diameter. Made of 3/8" x 2" heat treated high carbon steel; 31-5/8" centers.
Sale price$26.20
BALL SOCKET
SKU: SBJ1
Top Link Ball Socket, Cat 1&2, Standard Duty, 3/4"&1" ID, 1-1/2"&1-1/4" bore length, 7/8" sleeve width, 2-3/8" OD, Black Oxide finish.Weld-on combination ball joint. For 3/4" or 1" pins. Category I or II.
Sold out
Top Link Ball Socket, Cat 1&2, Standard Duty, 3/4"&1" ID, 1-1/2"&1-1/4" bore length, 7/8" sleeve width, 2-3/8" OD, Black Oxide finish.Weld-on combination ball joint. For 3/4" or 1" pins. Category I or II.
Sale price$30.36
No reviews
SPRING ASSEMBLY
SKU: C5NNN557B
Spring, ball retainer. For dual-category lift arms.
In stock, 115 units
Spring, ball retainer. For dual-category lift arms.
Sale price$1.89
LIFT ARM
SKU: D0NN555CLH
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555DRH.
In stock, 13 units
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555DRH.
Sale price$109.46
32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - RED
SKU: JSA1002R
Category 1 accommodates 7/8" drawbar or lower link pins.Replacement for Ford 9N555B right or left.For black version, order 873-LA335HT
Only 2 units left
Category 1 accommodates 7/8" drawbar or lower link pins.Replacement for Ford 9N555B right or left.For black version, order 873-LA335HT
Sale price$80.69
LIFT ARM
SKU: D0NN555DRH
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555CLH.
In stock, 44 units
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555CLH.
Sale price$112.78
CATEGORY 2 BALL SOCKET
SKU: 873-2216
Lift Arm Ball Socket, Cat 2, Heavy Duty Duty, 1-1/8" ID, 1-3/8" bore length, 1-3/8" sleeve width, 3-1/8" OD, Zinc Plated finish.
In stock, 59 units
Lift Arm Ball Socket, Cat 2, Heavy Duty Duty, 1-1/8" ID, 1-3/8" bore length, 1-3/8" sleeve width, 3-1/8" OD, Zinc Plated finish.
Sale price$37.32
MOWER DECK STABILIZER KIT. CONTAINS 2 BRACKETS AND 2 CHAINS
SKU: 873-159335
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
In stock, 47 units
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
Sale price$51.26
LEFT HAND TONG ASSEMBLY
SKU: FH1447
Left Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14411.
In stock, 8 units
Left Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14411.
Sale price$381.45
RIGHT HAND TONG
SKU: FH1448
Right Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14412.
Sold out
Right Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14412.
Sale price$381.45
TONG ARM
SKU: FH14416
Left hand formed tong assembly with combination ball socket. For speedy conversion to category I or II ball, 32" pin spacing.
Only 2 units left
Left hand formed tong assembly with combination ball socket. For speedy conversion to category I or II ball, 32" pin spacing.
Sale price$402.95
RIGHT HAND TONG ASSEMBLY
SKU: FH14417
Right Hand Tong Assembly. Formed tong combination ball socket. For speedy conversion to Category I or II ball, 32" pin spacing.
In stock, 6 units
Right Hand Tong Assembly. Formed tong combination ball socket. For speedy conversion to Category I or II ball, 32" pin spacing.
Sale price$402.95
32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - BLUE
SKU: JSA1002B
Category I accommodates 7/8" drawbar or lower link pins.For black version, order 873-LA335HT
In stock, 78 units
Category I accommodates 7/8" drawbar or lower link pins.For black version, order 873-LA335HT
Sale price$80.69
No reviews
32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - BLACK
SKU: 873-LA335HT
Category I accommodates 7/8" drawbar or lower link pins.Center section is heat treated.
In stock, 631 units
Category I accommodates 7/8" drawbar or lower link pins.Center section is heat treated.
Sale price$67.09
STABILIZER KIT RED
SKU: SK100
Stabilizer kit for Category I 3 point hitch, 31-1/2" hole spacing. Contains 2 arms, 2 brackets, 2 stabilizer pins with nut and lock washer, 2 linch pins with chains.
In stock, 95 units
Stabilizer kit for Category I 3 point hitch, 31-1/2" hole spacing. Contains 2 arms, 2 brackets, 2 stabilizer pins with nut and lock washer, 2 linch pins with chains.
Sale price$66.13
No reviews
TELESCOPING STABILIZER
SKU: 539881M2TSK
Stabilizer, telescoping arm, for 3-point hitch. Adjustable from 26" to 35".
In stock, 31 units
Stabilizer, telescoping arm, for 3-point hitch. Adjustable from 26" to 35".
Sale price$89.32
STABILIZER ARM - RIGHT HAND FOR FORD
SKU: 873-6252
Stabilizer Arm - Right Hand - Fits Ford 2000, 3000. Made of 3/8" x 2" heat treated high carbon steel; 7/8" pin holes on 31 5/8" centers.
Sold out
Stabilizer Arm - Right Hand - Fits Ford 2000, 3000. Made of 3/8" x 2" heat treated high carbon steel; 7/8" pin holes on 31 5/8" centers.
Sale price$26.20
HD ADJUSTABLE STABILIZER ARM
SKU: 873-628
Category 1 Heavy Duty Adjustable (Right Hand or Left Hand) - One piece forged ends - no welds to break. Adjusts from 27 1/2" to 35"; 7/8" pin holes; 7/8" threads.
In stock, 55 units
Category 1 Heavy Duty Adjustable (Right Hand or Left Hand) - One piece forged ends - no welds to break. Adjusts from 27 1/2" to 35"; 7/8" pin holes; 7/8" threads.
Sale price$36.99
LIFT ARM BALL FOR CLAW-TYPE ARMS
SKU: 105967A
Lower lift arm ball, special ball for models with claw type arms. Category I, 7/8" hole.
In stock, 12 units
Lower lift arm ball, special ball for models with claw type arms. Category I, 7/8" hole.
Sale price$12.96
CAT I BALL
SKU: 886428M1WC
Lift arm ball, category I, use in 191114M91, 886431M1 and 1869289M91 lift arms.
In stock, 51 units
Lift arm ball, category I, use in 191114M91, 886431M1 and 1869289M91 lift arms.
Sale price$10.60
CAT II BALL WITH CLIP 1-1/8" ID
SKU: 886429M1WC
Lift arm ball, category II ball, use in 191114M91, 886430M92 and 1862855M92 lift arms.
In stock, 64 units
Lift arm ball, category II ball, use in 191114M91, 886430M92 and 1862855M92 lift arms.
Sale price$11.60
LOW LINK BUSH
SKU: LLK65
Bushing kit, lift arm, contains 188148M1 bushing, 491105M1 spring and 2 each of 353957M1 screw and 188359M1 washer.
In stock, 9 units
Bushing kit, lift arm, contains 188148M1 bushing, 491105M1 spring and 2 each of 353957M1 screw and 188359M1 washer.
Sale price$14.18
COMBINATION BALL AND SOCKET
SKU: SBJ2
Lift Arm Ball Socket, Cat 1&2, Heavy Duty Duty, 7/8"&1-1/8" ID, 1-3/4" bore length, 1-3/16" sleeve width, 2-3/4" OD, Zinc Plated finish.Lift arm combination ball joint. For 7/8" or 1-1/8" pins. Category I or II. 1/4" thick race for light arms.
In stock, 606 units
Lift Arm Ball Socket, Cat 1&2, Heavy Duty Duty, 7/8"&1-1/8" ID, 1-3/4" bore length, 1-3/16" sleeve width, 2-3/4" OD, Zinc Plated finish.Lift arm combination ball joint. For 7/8" or 1-1/8" pins. Category I or II. 1/4" thick race for light arms.
Sale price$36.66
Filters (0)
Main menu